[New-Version]High Quality Braindump2go 7220X PDF and 7220X VCE Dumps 75Q Free Share[Q43-Q53]

2018 January New Avaya 7220X Exam Dumps with PDF and VCE Free Updated Today! Following are some new 7220X Exam Questions:

1.|2018 New Avaya 7220X Exam Dumps (PDF & VCE) 75Q&As Download:
https://www.braindump2go.com/7220x.html
2.|2018 New Avaya 7220X Exam Questions & Answers Download:
https://drive.google.com/drive/folders/1JnDbgCzOyM8n3jzC-h2paRntJRFNDxXl?usp=sharing

QUESTION 43
What statement about the H.323 to SIP routing is true?

A. Avaya Aura® Communication Manager does feature processing for both endpoints.
B. Avaya Aura® Communication Manager does feature processing for H.323 endpoint only.
C. Avaya Aura® Communication Manager does feature processing for SIP endpoint only.
D. Avaya Aura® Communication Manager does not do feature processing for any endpoint in this scenario.

Answer: A

QUESTION 44
Refer to the Exhibit. A SIP user is calling an H.323 user.
In this call flow, in which phase does Avaya Aura® Communication Manager (CM) handle the call processing foe each endpoint?
image_thumb[2]

A. both endpoints in the originating phase
B. H.323 endpoint in originating phase, SIP endpoint in terminating phase
C. SIP endpoint on originating phase, H.323 endpoint in terminating phase
D. both endpoints in the terminating phase

Answer: C

QUESTION 45
When retrieving a message from Avaya Aura® Messenger (AAM), what is the function of the RE-INVITE?

A. The RE-INVITE is only used when the initial INVITE is not transmitted successfully.
B. The RE-INVITE shuffles the media path off Avaya Aura® Communication Manager (CM).
C. The RE-INVITE is to allow the user to be authenticated.
D. The RE-INVITE is only sent if a voice port cannot be initially connected to the caller.

Answer: C

QUESTION 46
Refer to the Exhibit. Which two statements about a call from AST 1011111 to Remote Worker AST 1011112 are true? (Choose two.)
image_thumb[3]

A. Avaya Session Border Controller for Enterprise (SBCE) periodically sends SIP Options to 1011112 looking for a 200 ok response to check it is reachable.
B. SIP Signaling traverses the Avaya Session Border Controller for Enterprise (SBCE) and the Media must bypass the SBCE.
C. As far as Avaya Aura® Session Manager (SM) is concerned, all Remote Worker phones are registering from an IP address equal to the Avaya Session Border Controller for Enterprise (SBCE) Remote Worker Private IP address.
D. Avaya Session Border Controller for Enterprise (SBCE) needs to be built as a trusted SIP Entity and Entity link for remote workers.
E. The configuration of a Remote Worker AST is the same as an Office Worker AST in the Avaya Aura® System Manager (SMGR) user profiles.

Answer: CE

QUESTION 47
Refer to the Exhibits. The SIP call flow made from an Avaya Communicator Remote Worker is on the left, and the call flow made from a 96X1 telephone Remote Worker is on the right.
When comparing the two call flows, which statement is true?
image
image

A. There is no difference between the two.
B. Avaya Aura® Communication Manager does full call model processing for the SIP-to-SIP call flow and does half-call model processing for the SIP-to-Communicator call flow.
C. The Communicator does not register to Avaya Aura® Session Manager.
D. The Communicator registers to Avaya Session Border Controller for Enterprise (SBCE).

Answer: A

QUESTION 48
After an Avaya Aura® Communication Manager (CM) upgrade, a customer called Avaya support because their SIP telephones were unable to login.
Support was able to confirm that the telephones had not been upgraded.
Which pre-implementation step was omitted?

A. Provide accurate licensing specification.
B. Verify version installed is compatible with existing versions.
C. Test all third-party equipment and software.
D. Access support.avaya.com to verify customer systems compatibility.

Answer: B

QUESTION 49
Which two statements regarding the core architecture in the Avaya Aura® 7 solution are true? (Choose two.)

A. SIP trunks can only be configured on Avaya Aura® Session Manager (SM).
B. SIP user Agents register with Avaya Aura® Session Manager (SM).
C. SIP User Agents can register to Avaya Aura® Communication Manager (CM) or Avaya Aura® Session Manager (SM).
D. Avaya Aura® Media Server (AAMS) cannot connect to Avaya Aura® Communication Manager (CM) without routing via Avaya Aura® Session Manager (SM).
E. Avaya Aura® Media Server (AAMS) connects directly to Avaya Aura® Communication Manager (CM) using SIP.

Answer: BE

QUESTION 50
Which two statements describe steps for searching for an Avaya Aura® System Manager (SMGR) log containing the phrase ‘down’? (Choose two.)

A. Export the entire log file to your local PC, and then locally search with an application.
B. Navigate to Home / Services / Events / Logs / Log Viewer, then click on Filter, then Enable, and type ‘down’ into the Message box, then click on Apply.
C. Navigate to Home / Services / Events / Logs / Log Harvester, then click on Harvest logs, then type ‘down’ into the text contains box, then click on Apply.
D. Navigate to Home / Services / Events / Logs / Log Settings, then click on ‘text search’ and then type ‘down’ into the text search box, then click on Apply.

Answer: BC

QUESTION 51
As opposed to a regular SIP trace, what do SIP messages captured using the traceSM with “a=showSM” option display?

A. the message flow details from SM100 to the PPM servlet
B. the message flow details from the SM100 to Avaya Aura® Communication Manager (CM)
C. the message flow details from the network to the SIP container
D. the message flow details from the SM100 to the Avaya Aura® Session Manager (SM) Call Processing element

Answer: D

QUESTION 52
Which statement describes the steps to save the traceSM log file?

A. While traceSM is running, type ‘w’ and a filename; the file is written to the user’s current directory.
B. Export all logs from the Avaya Aura® System Manager (SMGR) log viewer.
C. While traceSM is running, type ‘w’ and a filename; the file is written to the /tmp directory.
D. Execute traceSM -w <filename>.

Answer: A

QUESTION 53
When running the display node-names ip command, what information is found?

A. type and link number
B. name and link number
C. IP address and type
D. name and IP address

Answer: D


!!!RECOMMEND!!!

1.|2018 New Avaya 7220X Exam Dumps (PDF & VCE) 75Q&As Download:
https://www.braindump2go.com/7220x.html
2.|2018 New Avaya 7220X Study Guide Video:
https://youtu.be/8qI-7B_cuqU