Braindump2go Free Hot IT Exam Dumps Collection!

Collection of Latest Braindump2go Hot Exam Dumps Questions!

Official 2014 Latest Microsoft 70-412 Exam Dump Free Download(131-140)!

QUESTION 131
You are employed as a network administrator at contoso.com . Contoso.com has an active directory domain named contoso.com All servers on the contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has a server named server1,which is configured as a file server.
You have been instructed to enabled a feature that discovers and eradicates duplication within data without compromising its reliability or accuracy.
Which of the following actions should you take?

A.    You should consider having the Data Deduplication feature enabled.
B.    You should consider having the Storage Spaces feature enabled.
C.    You should consider having the Storage Management feature enabled.
D.    You should consider having the folder redirection feature enabled.

Answer: A
Explanation:
A. Data deduplication involves finding and removing duplication within data without compromising its fidelity or integrity
B. Storage Spaces in Windows Server 2012 R2 and Windows 8 enables cost-effective, optimally used, highly available, scalable, and flexible storage solutions for business-critical (virtual or physical) deployments.
C. Windows Server 2012 R2 enables storage management that is comprehensive and fully
scriptable, and administrators can manage it remotely.
D. older Redirection lets administrators redirect the path of a folder to a new location.
http://technet.microsoft.com/en-us/library/hh831602.aspx
http://technet.microsoft.com/en-us/library/hh831739.aspx
http://technet.microsoft.com/en-us/library/hh831751.aspx
http://technet.microsoft.com/en-us/library/cc732275.aspx http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-to-data-deduplication- inwindows-server-2012.aspxclip_image001[40]

clip_image001[42]

QUESTION 132
You are employed as a network administrator at contoso.com. contoso.com has a single Active Directory domain named contoso.com.All servers on the Contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has two servers,named server1 and server2 which are configured in a two-node fail over cluster.
You are currently configuration the quorum settings for the cluster.
You want to make use of a quorum mode that allows each node to vote if it is available and in communication.
Which of the following is the mode you should use?

A.    Node Majority
B.    Node and Disk Majority
C.    Node and File Share Majority
D.    No Majority:Disk Only

Answer: A
Explanation:
A. Allows each node to vote
B. Allows each node and a disk witness to vote
C. Allows each node and a File share witness to vote
D. Allows one node with a specified disk to have quorum
http://technet.microsoft.com/en-us/library/cc770620(v=ws.10).aspx
 clip_image001[44]
QUESTION 133
You are employed as a network administrator at contoso.com. Contoso.com has a single Active Directory domain named contoso.com. All servers on the contoso.com network have Windows Server 2012 R2 installed.
You are preparing to install a third-party application on a contoso.com server,named SERVER1.
You find that the application is unable to install completely due to its driver not being digitally signed.
You want to make sure that the application can be installed succesfully.
Which of the following actions should you take_?

A.    You should consider downloading a signed driver
B.    You should consider having SERVER1 is restored to an earlier date
C.    You should consider making use of the Disable Driver Signature Enforcement option from the
Advanced Boot Option.
D.    You should consider restarting SERVER1 in safe Mode

Answer: C
Explanation:
A. The 3rd Party installation would need to be repackaged with a signed driver.
B. The restore to an older date would only work if the earlier date had Driver Sig Enforcement disabled.
C. Disable Driver Signature Enforcement from Advanced Boot Options allows the OS to load without the signed driver requirements
D. Safe Mode will not allow the unsigned driver to be installed, you need to select Disable Driver Signature Enforcement to not required signed drivers
http://technet.microsoft.com/en-us/library/bb491036.aspx
http://windows.microsoft.com/en-us/windows-vista/advanced-startup-options-includingsafe-mode
 clip_image001[46]

QUESTION 134
You are employed as a senior network administrator at contoso.com. Contoso.com has a single Active Directory Domain named contoso.com. All servers on the contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior network administrator.
You are currently discussing the Dnslint.exe tool.
Which of the following should this tool be used for ? (Choose all that apply)

A.    To help diagnose common DNS name resolution issues
B.    For developing scripts for configuring a DNS server
C.    To administer the DNS server Service.
D.    To look for specific DNS record set and sure that they are consistent across multiple DNS servers.
E.    To verify that DNS records used specifially for Active Directory replication are correct
F.    To Create and delete zones and resource records.

Answer: ADE
Explanation:
http://support.microsoft.com/kb/321045
 clip_image002[14]
QUESTION 135
You work as an administrator at contoso.com. Contoso.com network consists of a single domain named contoso.com. All servers on the contoso.com network have Windows Server 2012 R2 installed. Contoso.com has a server,named SERVER1,which has the AD DS,DHCP and DNS server roles installed.Contoso.com also has a server named SERVER2,which has the DHCP and Remote Access Server Role installed.You have configured a server,which has the File and Storage Services Server role installed.to automatically acquire an IP address.The server is named Server3
You then create a filter on SERVER1 Which of the following is a reason for this configuration?

A.    To make sure that SERVER1 issues Server3 an IP address.
B.    To make sure that SERVER1 does not issue SERVER3 an IP address
C.    To make sure that SERVER3 acquires a constant IP address from SERVER2 only.
D.    To make sure that SERVER3 is configured with a static IP address

Answer: B
Explanation:
A. MAC Address Filtering allows the ability to Deny a MAC addresses to be issued a IP from the DHCP server
B. Deny Filter would not allow SERVER1 to issue SERVER3 an IP
C. A DHCP Reservation on SERVER2 would be needed for a constant IP
D. QUESTION: states it
is configure to automatically acquire IP
http://technet.microsoft.com/en-us/library/cc779507(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ee941155(v=ws.10).aspx
 clip_image002[16]
QUESTION 136
You are employed as a network administrator at ABC.com. ABC.com has an Active Directory domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.
You have been instructed to configure a custom Windows Recovery Environmen(Windows RE) image that should allow for a drive is mapped automatically to a network share in the event that a server is started using the image
Which of the following actions should you take?

A.    You should consider configuring the startnet.cmd in the image
B.    You should consider configuring the startup.exe command included in the image.
C.    You should consider configuring the ntdsutil command included in the image
D.    You should consider configuring the certutil.exe command included in the image

Answer: A

QUESTION 137
You are employed as a senior network administrator at ABC.com. ABC.com has an Active Directory domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed. You are currently running a training exercise for junior network administrators.You are discussing the endpoint types supported by Active Directory Federation Services(AD FS) Which of the following are supported types?(Choose all that apply)

A.    SAML WebSSO
B.    Anonymous
C.    WS-Federation Passive
D.    Client Certicate
E.    WS-Trust

Answer: ACE
Explanation:
http://technet.microsoft.com/en-us/library/adfs2-help-endpoints(v=ws.10).aspx

QUESTION 138
You are employed as a senior network administrator at ABC.com. ABC.com has an Active Directory domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed The ABC.com domain has an Active Directory site configured in London,and an Active Directory site in New york.
You have been instructed to make sure that the synchronization of account lockout data happens quicker.

A.    You should consider editing the options attribute from WANLINK properties
B.    You should consider editing the options attribute from LANLIK properties
C.    You should consider editing the options attribute from the DEFAULTSITELINK properties
D.    You should consider editing the proxyAddressess attribute from the DEFAULTIPSITELINK properties.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/cc961787.aspx
 clip_image002[18]
 clip_image002[20]

QUESTION 139
You are employed as a senior network administrator at ABC.com. ABC.com has an Active Directory domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.
ABC.com has two servers,named SERVER1 and SERVER2 which are configured in a two-node failover cluster. Server1 includes a folder,named ABCAppData,which is configured as a Distributed File System (DFS) name space folder target. After configuring another two nodes in the failover cluster, you are instructed to make sure that access to ABC AppData is highly available.
You also have to make sure that application data is replicated to ABCAppData via DFS replication.
Which following actions should you take ?

A.    You should consider configuring a scale-out File Server
B.    You should consider configuring the replication settings for the cluster
C.    You should consider configuring a file server for general use
D.    You should consider configuring the Quorum settings

Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/hh831349.aspx
 clip_image001[48]
 clip_image002[22]
QUESTION 140
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.
Which IPV6 scope prefix should you use?

A.    FF00::
B.    2001::
C.    FD00:123:4567::
D.    FE80::

Answer: C
Explanation:
Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:
* They are not allocated by an address registry and may be used in networks by anyone without outside involvement.
* They are not guaranteed to be globally unique.
* Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in the global DNS.
As fd00::/8 ULAs are not meant to be routed outside their administrative domain (site or organization), administrators of interconnecting networks normally do not need to worry about the uniqueness of ULA prefixes.

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-411 Dump: http://www.braindump2go.com/70-412.html

         

, , , ,

Comments are currently closed.